Myer Printer - Cannot print transfer dockets

Step 1. Turn off printer (EPSON) for 2mins

Step 2. Ensure the printer is plugged into the new Internet device via the blue network cable.

Step 3. Turn the printer back on.

Step 4. After 1-2 minute, the printer should print out the config (IP Address. Example: 192.168.1.50)

** Keep this paper**

Step 5. Open Envimo app, go to the 3 white lines on the top left corner.

Step 6. Click on settings on the bottom left.

Step 7.  Scroll down until you get to

HARDWARE

Receipt Printer
Input the IP Address that printed out earlier from the printer. eg. 192.168.1.## Port: 9100 <-- Dont change port

Click Save and you should be able to click test - if something comes out, confirms the printer is now working.

Step 8. Re-print a completed transfer 
Click on Transfer Out
Go to Completed on the bottom right side

Select a transfer and then select "Reprint Transfer docket"

If this doesn't work, please call Aquila IT Support on 03 8412 9850